outdoor led signs in the use of the process will be due to pollution, loosening, vibration, heat, environmental temperature changes, and other factors caused a variety of failures, affecting the normal use of signs and even serious accidents.
To make the outdoor led signs life long, China outdoor led screen manufacturer
said that LED display for regular maintenance is essential. Outdoor LED screen, dust in the atmosphere from the ventilation hole into the equipment, for fans and other equipment will speed up wear and tear or even damage. Dust will also fall on the screen inside the control device surface, reduce heat conduction and insulation performance, in the humid weather when the dust absorption of moisture in the air leads to short circuit, the long-term can also lead to PCB board and electronic components of mildew, resulting in the technical performance of equipment decline, failure.
Therefore, the LED screen cleaning work seems to be simple, in fact, maintenance work is a very important link. outdoor led signs is a high power consumption equipment, running for a considerable period of time, due to several start and stop and run, which is the electrical part of the terminal blocks due to heat and cold will cause loosening, contact is not tight, the formation of virtual connection, serious fever, or even the ignition of plastic components next to. Signal terminals will also be due to the ambient temperature and cold changes loose, moisture erosion leads to poor contact, resulting in equipment failure, it is necessary to the LED display connectors on a regular basis fastening.
In the fastener adjustment, should be evenly and properly, to ensure strong and effective. For outdoor LED screen
surface pollution is particularly serious, but also to the display surface cleaning, cleaning staff according to different dirt on the screen to choose different cleaning agent targeted cleaning, so as to ensure that the LED lamp and mask without damaging the premise of the completion of the LED screen cleaning work.
Cleaning preparation requires attention to two points:
First, before cleaning, need to unplug the power cord.
Second, the choice of cleaning liquid, cleaning liquid generally includes electrolyte, high-purity distilled water, anti-static liquid, etc., to choose the quality of good, so that the effective cleaning of the LED screen dust and other stains mark.
Cleaning maintenance is divided into three steps: The first step: vacuuming.
fine pixel led d series outdoor led signs feature:
First, remove dirt and dust from the surface of the screen mask. Step two: Wet wash. Note that the lotion can not be sprayed directly on the screen, but to be a little cleaning liquid spray on the cleaning cloth, and then gently along the same direction to wipe.
Also can use the soft brush of the vacuum cleaner on the lamp mask to scrub, the dirt clean brush. The third step: drying. Use vacuum cleaner to absorb wet and dry wash left after the water mark to ensure that the display screen mask clean and dust-free.
Remote wireless transmission
With wireless data transmission module inside, on-time GPRS/3G data release function Control.With automatic control system, can handle and publish the traffic information, brightness control, temperature adjust, monitor running status and alarm automatically, running the whole time itself.
High brightness and Brightness adjustment
Outdoor D Series has been designed with high brightness and refresh rate, the image can still keep clearly under strong sunshine , which will greatly enhance the display effects of client’s advertising.With light-sensor control system, adjust the screen brightness automatically according to the environment light, power saved and environment protection, lower cost for running.
Economical and Power Saving Display
We take many efforts on LED display
, and have developed many methods to save more energy while operating. This new generation screen is much more environmental friendly and energy saving led display
New low voltage constant current driving IC saves over 30% energy. Your investment will be earned back in one or two year. Save the environment and your wallet.Enhanced ventilation and cooling system.Maintains a consistent temperature. This increases the image quality and the life time of the display.
With an operating temperature between -20C and 60C, our LED displays can be installed in any environment. They are able to operate near the sea where the temperatures can change rapidly and the air is humid and salt.
IP 65 Waterproof Cabinet Design
With modular cabinet design we support several pixel densities. This makes the installation process easier. The thinner and lighter cabinet decreased the delivery and installation cost effectively.The unique waterproof design is highly dust and waterproof and is able to be directly installed outdoor.Special design structure exterior with IP65.The cabinets are moisture and corrosion proof. Ready to work in all weather conditions.