With the advent of the rainy season, every day, rain, LED display
maintenance and storage improper and damp, will cause dead lights, dark bright, short circuit, open and light body damage and so on.
Don't worry, the LED display practical damp-proof method, for your melancholy.
First: LED module storage
LED modules need drying and ventilation, storage with pallets or other objects, not directly contact with the ground.
The storage environment installs the temperature humidity monitor, the environment humidity control under 60%RH, the LED module expresses very comfortable.
To the LED module packaging, after the opening of the product storage needs to be repackaged and put in the appropriate desiccant. LED module storage time if more than 1 months, before using the module should be 6 hours of brightness gradually aging: full bright brightness set to 10%/1h, full bright brightness set to 30%/1h, all bright brightness set to 60%/2h, all bright brightness set to 80%/1h, all bright brightness set to 100%/1h.
After 6 hours of aging, can be used to complete the screen assembly.
Second: Outdoor LED display
In the outdoor LED display installation site configuration temperature and humidity monitor, in time to monitor the humidity around the screen body;
Screen body installed after the first rainy day or heavy rain, should promptly check the internal whether there are damp, water droplets, water vapor and other phenomena;
In the ambient humidity of the 10%~85%rh, at least 1 times a day, each display screen normal work for more than 2 hours;
Environmental humidity is higher than 90%RH or encountered back to the South days, should be used to screen the environment for dehumidification, and ensure that the display screen daily work more than 4H.
Third: Indoor LED display
Indoor LED display damp-proof
In the 10%~65%RH environment humidity, display screen at least 1 times a day, every time to ensure normal work for more than 4 hours;
Environmental humidity is higher than 65%RH or encountered back to the South days, should be used to screen the environment for dehumidification, and to ensure that the display screen normal daily work more than 8H; Night should close the relevant doors and windows, to prevent the night regain caused the screen body damage
Indoor rental LED screen
After each use, should be immediately loaded into the air transport box for sealed storage;
In each air transit box, there shall be no less than 50g of desiccant or moisture absorption bag, and periodically to the desiccant or moisture absorption bag to do failure inspection, every 2 months need to be replaced;
In the 10%~65%RH environment humidity, the display should be out every half month light work (play video) above 2H;
Ambient humidity over 65%rh or meet the southerly days, the display should be taken out every week light work (play video) more than 2H;
Screen body rental use process, should avoid the screen body to rain or dip water, if not very water, should be in time to dry and blow dryer, and the screen body placed 2H, then lit work 2H;
It is strictly forbidden to use indoor renting screen as outdoor renting screen, especially in open-air environment; Rainy season LED display damp-proof practical method, let your LED display to run longer.