Home > LED Card >
Novastar DH426 Receiver Card
  • Novastar DH426
  • Novastar DH426
 
Novastar DH426Novastar DH426

Novastar DH426 Receiver Card

Product Details
Novastar DH426 Receiving Card

Product type: Universal LED receiving card

Loaded pixels: 512 × 256 pixels

RGB data: 32 groups

Connect the monitoring card:None

Light Board Flash:None

Onboard: 16 HUB75 interfaces

Certification: RoHS, EMC

Novastar DH426 is a universal LED receiving card with maximum of 512 × 256 pixels and support up to 32 groups of RGB data. It adopts 16 HUB75 interfaces with high stability and reliability,Novastar DH426 is suitable for various LED display environments.

The hardware and software design of Novastar DH426 fully consider the user's install, operation and maintenance, making installation easier, more stable and more efficient maintenance.

Improve display effect

RGB independent Gamma adjustment

With the independent master and NovaLCT (V5.2.0 and above) that support RGB independent Gamma adjustment, the “Red Gamma”, “Green Gamma”, and “Blue Gamma” are adjusted separately to effectively control LED display low-gray and white balance and other issues make the picture more nature.

Supports per-light chroma correction

With NovaLCT and NovaCLB, the brightness and chromaticity of each LEDs are corrected to effectively eliminate the color difference, so that the brightness and chromaticity of LED screen are highly uniform and improve the quality of picture.

Fast light and dark line adjustment

Quickly adjust the light and dark lines on NovaLCT to solve the light and dark lines on the LED display caused by the splicing of the cabinet and module. The adjustment takes effect immediately.

3D function

With the independent master that supports 3D function.

Improve reliability

Loop backup

The reliability of cascading network cables between receiving cards is increased through the active-standby redundancy mechanism. when one of the lines fails, the other line will work immediately to ensure that the LED screen works normally.

Dual backup

The receiving card is stored with two pieces when it delivery the factory to prevent the receiving card from deadlocking due to  program update process.

Improve maintainability

Mapping function

After enabling the Mapping function on NovaLCT, the cabinet will show the receiving card number and network port information, which can clearly get the location.

Error monitoring

With NovaLCT (V5.2.0 and above) detects the network communication quality between the sending controller and the receiving card or between the receiving card and the receiving card, records the number of error and helps to eliminate the hidden problem of network communication.

Temperature and voltage monitoring

It can monitor its own temperature and voltage without the need for other peripherals. You can check the temperature and voltage of the receiving card on NovaLCT.

Configuration parameter readback

Configuration parameters of receiving card can be read back on NovaLCT and saved locally.

Firmware program readback

On NovaLCT, the firmware of the receiving card can be read back and saved locally.
Related Products
icon

Copyright © FINE PIXEL LED All Rights Reserved | Sitemap|