Home>LED Display Basics

Linsn LED Studio Software Setup

  Tip:Windows XP/7 must be used to configure the sender/receivers, Panel worked fine

  In order to configure the LED panels you will need to download the Linsn LED studio software. It's free, however they will ask for a serial number- just enter "888888".

  If you are using 32x32 or 32x64 panels, check out the config file!

linsn led studio software setup

  Before opening the software, connect the sender board to the computer via USB. This will let you configure both the sender and receiver board. Now open the software and click Option>>Software Setup

linsn led studio software setup
  In order to access the configuration screen, type 'linsn' anywhere while the window is active. It doesn't have to be in a text box. Typing those letters in sequence will bring up another password dialog box. The password is "168".

linsn led studio software setup
  On the sender tab, you can adjust the display resolution, mirror/rotation, as well the start X/Y position of what part of the screen will display on the LED wall. This will update in realtime. Click Save on Sender when you've got it where you want it.

linsn led studio software setup
  On the receiver tab, load up the configuration file, and the LED wall will mirror the 96x96 area you specified in the sender tab.

linsn led studio software setup
  The display connection tab is used for more elaborate setups with multiple receiver cards. In our case we're only using one, displaying 96 x 96 pixels. If things aren't working properly, load up file.

  Don't forget to Save on Receiver when you're done configuring the settings.

  Peter wrote in to us after following this tutorial and says...

linsn led studio software setup


  During testing a 96 x 64 pixel video wall I experienced the following problems especially with your recently delivered LED panels (ID: 420):

  Several red dots appeared across the screen. This is most striking (and disturbing) while fading scenes.

  Furthermore, the video is displaced horizontally by one pixel, so the origin of the video on the upper left side must be located at (x, y) = (1, 0) instead of (0, 0).

  Luckily, a small configuration change solves all problems. Please consider to modify the receiver card setting in "Adawall_96x96.RCG” as depicted to the left. Note: when setting “Scan clock” to 18.3 the software automatically sets the “Phase of clock” to 3, which seems to be a recommended value.

linsn led studio software setup
 
 At this point you should see the top left 96 pixels mirrored on your LED signs! Mess around with the start X and start Y values on the sender configuration and load up some videos and image.

Share by James DeVito
icon

Copyright © FINE PIXEL LED Co., Ltd All Rights Reserved | Sitemap|